The work () done by a system is:

withand

Plugging the values given into the work equation gives:

The work () done by a system is:

withand

Plugging the values given into the work equation gives:

For an isothermal process there is no change in temperature, therefore, the temperature is a constant. An ideal gas has an internal energy,, that is proportional to temperature, so if the temperature is does not change the internal energy does not change. Hence the name isothermal (iso means the same and thermal means temperature).

If you rearrange the equation, you will find that:

A simple explanation of this is that all the heat applied to the system is used to do the work. A piston is a good example for this phenomenon. This happens when every bit of energy applied or removed from a piston as work is done so slowly that all the heat has enough time to conduct into or out of the system and maintain a constant temperature.

The expression for the relationship between heat () and work () is change in internal energy ():

The work () done by a system is:

withand

Plugging work () into the internal energy equation gives:

Plugging the values given into the internal energy equation gives:

过程描述的问题是一个isothermal process. An isothermal process has a constant temperature, therefore, there is no change in temperature. For an isothermal reversible process, the work done by the system is:

Plugging the values given into the equation gives:

The expression for the relationship between heat () and work () is change in internal energy ():

The work () done by a system is:

withand

Plugging work () into the internal energy equation gives:

Plugging the values given into the internal energy equation gives:

过程描述的问题是一个isothermal process. An isothermal process has a constant temperature, therefore, there no change in temperature. For an isothermal reversible process, the work done by the system is:

Convert the grams to moles of argon:

Plugging the values given into the equation gives:

Isothermic reactions are characterized as reactions that occur in constant temperature. Recall that phase changes (such as condensation, evaporation, etc.) occur at a constant temperature (melting point, boiling point,e etc.). Consider the following example. Water boils at; this means that when liquid water is placed at its boiling point, it will convert rapidly to gas (water vapor). The reaction will happen at a constant temperature (at) and, therefore, will be an isothermic process. This is true for all phase change reactions. Condensation is conversion of solid to liquid, evaporation is conversion of liquid to gas, and sublimation is conversion of solid to gas (or gas to solid).

Isothermic reactions occur in constant temperature, isovolemic reactions occur in constant volume and isobaric reactions occur in constant pressure. During phase changes, like melting, the temperature stays constant (at the melting point). The pressure will also likely remain constant because most reactions are carried out at atmospheric pressure (); therefore, melting an ice cube is an isothermic and an isobaric reaction.

The volume, on the other hand, changes. Recall that gases have the highest volume, solids have the smallest volume and liquids have intermediate volume. This means that melting converts a low volume solid to higher volume liquid (therefore, this is not an isovolemic reaction). As a side note, recall that water is the only exception to this rule. Ice cube (solid water) has higher volume than liquid water.

The thermal energy an object contains is given by:

Whereis the specific heat,is the change in temperature,is the mass, andis the amount of energy. We are given everything but the, so we rearrange the equation to

Plug in known values and solve: